ABR Electrode Application


1)  ABR signals come from
    a)  the cochlea
    b)  nerves of hearing in the brain stem
    c)  nerves for understanding sound, in the brain

Answer?


2)  The ABR signals are:
    a)  small
    b)  large
    c)  mixed together with other nerve signals
    d)  both a and c
    e)  both b and c

Answer?



3)  The electrodes attached to the patients skin serve
what purpose?
    a)  The are used to send a signal to the ear
        (stimulate the cochlea)
    b)  They send a signal to (stimulate) the brainstem
    c)  They measure the signals coming from the nerves of hearing

Answer?


4)  Why is it important to have clean skin where the electrodes
    will be attached?
    a)  Because the impedance testing won't work unless the skin is clean
    b)  Because you cannot stimulate the ear if the skin is not clean
    c)  Because the electrodes need to pick up the tiny signal, and
    dirt and dead skin cells make this harder
    d)  It is actually not important

Answer?


5)  The ground electrode is most commonly placed at the nasion
or at the Fz location, although it can go essentially anywhere.
Where are these locations?  Can you visualize it?

Answer?


6)  What does A1 mean?  What does M1 mean?  Would you put
an electrode that connects to the amplifier at the negative or
positive input to the "physiologic amplifier" at this location?

There is some new information with this answer, so please be
sure to check the answer even if you are confident of your
answer.

Answer?


7)  Which electrode (location) is connected to the positive
terminal of the ABR physiologic amplifier.

Answer?


8)  Assume that you have connected the following set-up


You measure the electrode impedances as follows:
    Pink to green - 3k ohms
    Pink to red    - 2k ohms
    Pink to blue   - 3k ohms

Do you need to reattach any electrodes, and if so, which one(s)?

Answer?


9)

Let's assume this time you measure the electrode
impedances as follows:
    Pink to green - 3k ohms
    Pink to red    - 7k ohms
    Pink to blue   - 3k ohms

Do you need to reattach any electrodes, and if so, which one(s)?

Answer?



 

10)

Let's assume this time you measure the electrode
impedances as follows:
    Pink to green - 10k ohms
    Pink to red    - 100k ohms
    Pink to blue   - 3k ohms

Do you need to reattach any electrodes, and if so, which one(s)?

Answer contains new information!

Answer?




11)Let's assume this time you measure the electrode
impedances as follows:
    Pink to green - 20k ohms
    Pink to red    - 19k ohms
    Pink to blue   - 22k ohms

Do you need to reattach any electrodes, and if so, which one(s)?

Answer contains new information!

Answer?


12)  What does "braiding" the electrodes mean, and why is it done?

Answer contains a bit of new information.

Answer?


13)  What is the special consideration when putting the earphones
on the person?

Answer contains a bit of new information.

Answer?


14)  What do you think the advantages and
disadvantages of disposable electrodes would
be.

Answer contains new information.

Answer?



Template / concept Copyright (c) 2001, AuDStudent.com
All rights reserved.

Content Copyright (c) 2002 Nova Southeastern University